Cracked Power Your Mpulse Data Promo With Http Injector Config File By LTN

Johnson esther · Oct 2, 2018

B8A822D418E8F737068CA46689ABA18D

Jasper · Oct 2, 2018

140B7F308092C39FF906C3EBB24F5CC3

Kido24 · Oct 2, 2018

9FB11151A346BF20391F025462304E0D

Benjamin Junior · Oct 2, 2018

76C4FB990748DABB75546F4C7CFFDACC

Krypton · Oct 2, 2018

S.M.H this is really getting out of hand

salawu hamid afolabi · Oct 10, 2018

Jams said: ↑

Hello all LTN community at large. It is not new that we all have enjoy free browsing up to an extent on this community especially if you're a bonafide member of this join, you will surely understand.

So here we have been working on tunneling this plan unleashed by MTN quite some days now. Thou the first patch we made was capped at 30mb and that was off the plan because it doesn't require you to sub for the so called plan (mpulse data).

Now we have been receiving a lot of complain and mails from some members in here to see if there is a way to power this so called plan. And I am very glad to tell you guys that it was a successful one all thanks to LTN geeks.
And also special thanks to @hector

So this plan is one of the mouth watering one and you will all agree with me that this is a free paid plan on its own.

The Mpulse data plan comes in two variant which are;

1.5GB >> N150
300mb >> N50

How To Subscribe To This Plan?
✓Kindly dial *344# , choose the no 2 option and select one among the listan data plan as stated above.

Now comes the tunneling part. We actually won't release the ehi config file for Http Injector but at the same we will release.

In what essence if you ask?
Yes, we we have implemented a security measures on our tweaks to make it worthwhile and prevent blockage early than anticipated for.

So each LTN members will have their own and personal config file and it will be impossible to share it using each phone Hardware serial number...

How?

FEATURES OF THIS MPULSE CONFIG FILE.
>>It works with mpulse data.

>>It works at 0.0k balance if you didn't sub for the mpusle data but capped at 30mb

How To Get My Own Serial Hardware Id.
✓Open your Http Injector.
✓Tap on the tripple wide row dot located above at the left side as illustrated in this screenshot below;
View attachment 1043

✓Then copy it and past it in the comments box.

✓Non established config file will be created for 7days only, while established members will have 14 days config file including a month config file which will be updated soon.
Wait for your config file to be sent to you via the comments box

Remember this is for the good of both you and I because I know of some lame to be called blogger to misuse this if this security measure ain't implemented.

Don't forget to hit the like button , share thid thread to those in need and also feedback if it is working perfectly for you.

Don't forget to join our telegram group and channel through the link below;
>>You must be registered to see links

>>You must be registered to see links
Click to expand...

salawu hamid afolabi · Oct 10, 2018

1E346B2E15D9763201F6F8208E2316F2

Soprano225 · Oct 10, 2018

750F2D14A6C202E33BFEAAEEF175DF35

wisdom osinachi · Oct 10, 2018

9D150BDE7215ED7AD4C643AEB29E5C70

Klinsman · Oct 10, 2018

B2A08B4EDD6A25C34361FFBA744D8BE2

salawu hamid afolabi · Oct 10, 2018

Jams said: ↑

Hello all LTN community at large. It is not new that we all have enjoy free browsing up to an extent on this community especially if you're a bonafide member of this join, you will surely understand.

So here we have been working on tunneling this plan unleashed by MTN quite some days now. Thou the first patch we made was capped at 30mb and that was off the plan because it doesn't require you to sub for the so called plan (mpulse data).

Now we have been receiving a lot of complain and mails from some members in here to see if there is a way to power this so called plan. And I am very glad to tell you guys that it was a successful one all thanks to LTN geeks.
And also special thanks to @hector

So this plan is one of the mouth watering one and you will all agree with me that this is a free paid plan on its own.

The Mpulse data plan comes in two variant which are;

1.5GB >> N150
300mb >> N50

How To Subscribe To This Plan?
✓Kindly dial *344# , choose the no 2 option and select one among the listan data plan as stated above.

Now comes the tunneling part. We actually won't release the ehi config file for Http Injector but at the same we will release.

In what essence if you ask?
Yes, we we have implemented a security measures on our tweaks to make it worthwhile and prevent blockage early than anticipated for.

So each LTN members will have their own and personal config file and it will be impossible to share it using each phone Hardware serial number...

How?

FEATURES OF THIS MPULSE CONFIG FILE.
>>It works with mpulse data.

>>It works at 0.0k balance if you didn't sub for the mpusle data but capped at 30mb

How To Get My Own Serial Hardware Id.
✓Open your Http Injector.
✓Tap on the tripple wide row dot located above at the left side as illustrated in this screenshot below;
View attachment 1043

✓Then copy it and past it in the comments box.

✓Non established config file will be created for 7days only, while established members will have 14 days config file including a month config file which will be updated soon.
Wait for your config file to be sent to you via the comments box

Remember this is for the good of both you and I because I know of some lame to be called blogger to misuse this if this security measure ain't implemented.

Don't forget to hit the like button , share thid thread to those in need and also feedback if it is working perfectly for you.

Don't forget to join our telegram group and channel through the link below;
>>You must be registered to see links

>>You must be registered to see links
Click to expand...

Jams said: ↑

Hello all LTN community at large. It is not new that we all have enjoy free browsing up to an extent on this community especially if you're a bonafide member of this join, you will surely understand.

So here we have been working on tunneling this plan unleashed by MTN quite some days now. Thou the first patch we made was capped at 30mb and that was off the plan because it doesn't require you to sub for the so called plan (mpulse data).

Now we have been receiving a lot of complain and mails from some members in here to see if there is a way to power this so called plan. And I am very glad to tell you guys that it was a successful one all thanks to LTN geeks.
And also special thanks to @hector

So this plan is one of the mouth watering one and you will all agree with me that this is a free paid plan on its own.

The Mpulse data plan comes in two variant which are;

1.5GB >> N150
300mb >> N50

How To Subscribe To This Plan?
✓Kindly dial *344# , choose the no 2 option and select one among the listan data plan as stated above.

Now comes the tunneling part. We actually won't release the ehi config file for Http Injector but at the same we will release.

In what essence if you ask?
Yes, we we have implemented a security measures on our tweaks to make it worthwhile and prevent blockage early than anticipated for.

So each LTN members will have their own and personal config file and it will be impossible to share it using each phone Hardware serial number...

How?

FEATURES OF THIS MPULSE CONFIG FILE.
>>It works with mpulse data.

>>It works at 0.0k balance if you didn't sub for the mpusle data but capped at 30mb

How To Get My Own Serial Hardware Id.
✓Open your Http Injector.
✓Tap on the tripple wide row dot located above at the left side as illustrated in this screenshot below;
View attachment 1043

✓Then copy it and past it in the comments box.

✓Non established config file will be created for 7days only, while established members will have 14 days config file including a month config file which will be updated soon.
Wait for your config file to be sent to you via the comments box

Remember this is for the good of both you and I because I know of some lame to be called blogger to misuse this if this security measure ain't implemented.

Don't forget to hit the like button , share thid thread to those in need and also feedback if it is working perfectly for you.

Don't forget to join our telegram group and channel through the link below;
>>You must be registered to see links

>>You must be registered to see links
Click to expand...

Jams said: ↑

Hello all LTN community at large. It is not new that we all have enjoy free browsing up to an extent on this community especially if you're a bonafide member of this join, you will surely understand.

So here we have been working on tunneling this plan unleashed by MTN quite some days now. Thou the first patch we made was capped at 30mb and that was off the plan because it doesn't require you to sub for the so called plan (mpulse data).

Now we have been receiving a lot of complain and mails from some members in here to see if there is a way to power this so called plan. And I am very glad to tell you guys that it was a successful one all thanks to LTN geeks.
And also special thanks to @hector

So this plan is one of the mouth watering one and you will all agree with me that this is a free paid plan on its own.

The Mpulse data plan comes in two variant which are;

1.5GB >> N150
300mb >> N50

How To Subscribe To This Plan?
✓Kindly dial *344# , choose the no 2 option and select one among the listan data plan as stated above.

Now comes the tunneling part. We actually won't release the ehi config file for Http Injector but at the same we will release.

In what essence if you ask?
Yes, we we have implemented a security measures on our tweaks to make it worthwhile and prevent blockage early than anticipated for.

So each LTN members will have their own and personal config file and it will be impossible to share it using each phone Hardware serial number...

How?

FEATURES OF THIS MPULSE CONFIG FILE.
>>It works with mpulse data.

>>It works at 0.0k balance if you didn't sub for the mpusle data but capped at 30mb

How To Get My Own Serial Hardware Id.
✓Open your Http Injector.
✓Tap on the tripple wide row dot located above at the left side as illustrated in this screenshot below;
View attachment 1043

✓Then copy it and past it in the comments box.

✓Non established config file will be created for 7days only, while established members will have 14 days config file including a month config file which will be updated soon.
Wait for your config file to be sent to you via the comments box

Remember this is for the good of both you and I because I know of some lame to be called blogger to misuse this if this security measure ain't implemented.

Don't forget to hit the like button , share thid thread to those in need and also feedback if it is working perfectly for you.

Don't forget to join our telegram group and channel through the link below;
>>You must be registered to see links

>>You must be registered to see links
Click to expand...

Ezekielhb · Oct 10, 2018

4DA83F366B56295C2BA49C7A6AABFC31

Emmykay · Oct 10, 2018

803BE6AE8DBE885318FE77F94D60BED8

Smog82 · Oct 10, 2018

C2F1FF6392F891F4D8C36ADC6E4C1CCE

Mpower · Oct 10, 2018

B32BDDBD07DD12AB6F18B41DD5EA4128

cloverflex · Oct 10, 2018

72A93330D45B28E395AEAC2F0BEA3DE5

Ehmbeeklass · Oct 10, 2018

F496AB8151C9F0B09DCC7AFB33148A53

Ghee · Oct 10, 2018

B2F4E9B1B437A30F0BF72B7A243E574B

Chioma Eluwa · Oct 10, 2018

E5CB08E32425C313905D074C545E12A3e

Olabiyi · Oct 10, 2018

5A96551FD6D3C42CDA057E7BCC6533F0

Log in or Sign up

Cracked Power Your Mpulse Data Promo With Http Injector Config File By LTN

Johnson esther Teams

Jasper Teams

Kido24 Teams

Benjamin Junior Teams

Krypton Guru Established

salawu hamid afolabi Teams

salawu hamid afolabi Teams

Soprano225 Participant Established

wisdom osinachi Teams

Klinsman Teams

salawu hamid afolabi Teams

Ezekielhb Teams

Emmykay Teams

Smog82 Teams

Mpower Teams

cloverflex Teams

Ehmbeeklass Teams

Ghee Teams

Chioma Eluwa Teams

Olabiyi Teams

Hot How to Power all Your Apps on Samsung Smartphone with MTN mPulse Data Plan via Max VPN

Samsung Max VPN Settings For MTN MPulse Data To Power All Apps

Hot Power Your Mpulse Data With PC Using SVL CONFIG FILE

Power Your Mpulse Data Promo With Lifetime Spark Vpn Config [Svc]

Cracked LifeTime Ehi Config File For Http Injector To Power Your Mpulse Data

Log in or Sign up

Cracked Power Your Mpulse Data Promo With Http Injector Config File By LTN

Johnson esther Teams

Jasper Teams

Kido24 Teams

Benjamin Junior Teams

Krypton Guru Established

salawu hamid afolabi Teams

salawu hamid afolabi Teams

Soprano225 Participant Established

wisdom osinachi Teams

Klinsman Teams

salawu hamid afolabi Teams

Ezekielhb Teams

Emmykay Teams

Smog82 Teams

Mpower Teams

cloverflex Teams

Ehmbeeklass Teams

Ghee Teams

Chioma Eluwa Teams

Olabiyi Teams

Hot How to Power all Your Apps on Samsung Smartphone with MTN mPulse Data Plan via Max VPN

Samsung Max VPN Settings For MTN MPulse Data To Power All Apps

Hot Power Your Mpulse Data With PC Using SVL CONFIG FILE

Power Your Mpulse Data Promo With Lifetime Spark Vpn Config [Svc]

Cracked LifeTime Ehi Config File For Http Injector To Power Your Mpulse Data

Useful Searches